Automation: completely eliminating machine programming time and errors, by using parametric programming

September 2021 News
programmazione parametrica

The programming time of a machine and the time to send and enter work orders is time that costs the company a lot.

First of all, programming a machine tool, a punching machine or a laser requires a technician with process and product skills; that represents a cost for the company.

Secondly, every programming operation is subject to errors, which in turn generate expensive production waste and incorrect production.

Clearly, in some cases, the cost of programming cannot be eliminated – this might apply to companies making one-off pieces.

However, parametric programming can quite often resolve all these issues.

The Pareto principle that I described in this article comes in handy here.
When we look at production, products are often grouped into families and these families have common traits, such as the width of the coil, certain groupings of processes, notches and so on.

In general, only one drawing of the products in a family can be created in which the dimensions are defined by parameters and the various types of processing are correlated by mathematical rules.

Below are a few examples of parametric products:

  • Door and window panels
  • Door and window frames
  • Frames and structures for air machines
  • Air dampers and fire dampers
  • Shelving and shelves
  • Rolling shutter curtains
  • Venetian blinds
  • Structures for industrial constructions (C, Z and Sigma profiles)
  • Structures and paneling for elevators and much more

When we work on one of these markets, there is a tremendous opportunity to completely eliminate programming time, as well as the risk of entering incorrect order information.

Indeed, when production and products are defined by rules, systems such as parametric punching allow data transfer and programs to be generated directly from orders loaded into the company’s ERP system – provided said orders include the information required to define:

  • Product family
  • Parameters
  • Quantity to be produced

Many roll forming companies have parametric products.
In fact, when working from coils, profiles often have the same width, but can have variable lengths and be machined differently.

Parametric punching machines and roll forming systems make it possible to produce a “batch of one”, meaning mass production of products that are all different from one another, customized for each customer.

This is named “Zero Standard”.

The line operator already finds all the programs and the JobList loaded onto the machine.
Consequently, the operator only needs to check the machine’s equipment – i.e. that the correct tools and Combi groups are on board – and mount the correct coil for the processing required.

The operator doesn’t have to perform any data entry, which can lead to production errors, but only has to check the equipment, perform quality controls, load the raw material and unload the finished products.

Watch at the video here below to get an example of Parametric Programming.

question icon (cookie abilitation)

SOME CONTENTS OR FUNCTIONALITIES ARE NOT AVAILABLE
DUE TO YOUR COOKIE PREFERENCES!

Want to view all contents and get the best navigation experience?
It’s simple: Enable the cookie utilization by opening the Cookie Preferences on the lower right!

 

If you want to eliminate programming time and errors, contact us at: [email protected]

 

Andrea Dallan avatar
Andrea Dallan
CEO – Dallan Spa

Share This

This website uses cookies to improve user experience. By clicking the enable button you get the best experience on the website with full contents, consenting to all cookies in accordance with our  Cookie policy.